Panasonic Attune II 설치 설명서
16
Setting the Center Module
How to delete an ID
This function is used to cancel the ID registration of All-In-
One Headsets or Belt Packs.
One Headsets or Belt Packs.
1
Turn off the All-In-One Headset or Belt Pack to
be deleted.
be deleted.
2
On the Settings screen, touch the [Headsets]
button, and then the [ID Deletion] button.
button, and then the [ID Deletion] button.
w
p All of the All-In-One Headsets or Belt Packs with
registered IDs are displayed in a list.
* If there is no All-In-One Headset or Belt Pack with
* If there is no All-In-One Headset or Belt Pack with
registered IDs, this screen is not displayed.
3
On the ID Deletion screen, touch the [Deletion]
button of the All-In-One Headset or Belt Pack
to be deleted.
button of the All-In-One Headset or Belt Pack
to be deleted.
w
p The following confirmation pop-up screen is
displayed. To delete, touch the [YES] button. To
cancel deletion, touch the [NO] button.
cancel deletion, touch the [NO] button.
w
p You can check your Headset number by turning it on
and listening to the voice prompt. When an All-In-One
Headset or Belt Pack is turned on, the following voice
prompts will be heard: “Hello”, “Headset xx” (xx is the
ID number registered in the Center Module), “Lane x”
(x is the connected lane).
Headset or Belt Pack is turned on, the following voice
prompts will be heard: “Hello”, “Headset xx” (xx is the
ID number registered in the Center Module), “Lane x”
(x is the connected lane).
Note
How to register groups
Register a group of All-In-One Headsets or Belt Packs.
If you select a group as the broadcast destination for alert
messages or reminder messages, you can broadcast to
multiple All-In-One Headsets or Belt Packs simultaneously.
If you select a group as the broadcast destination for alert
messages or reminder messages, you can broadcast to
multiple All-In-One Headsets or Belt Packs simultaneously.
1
On the Settings screen, touch the [Headsets]
button, and then the [Group] button.
button, and then the [Group] button.
w
p You can set from Group 1 to Group 6.
Note
2
Touch the button of the group to be set.
w
p All of the All-In-One Headsets or Belt Packs with
registered IDs are displayed in a list.
* If there is no All-In-One Headset or Belt Pack with
* If there is no All-In-One Headset or Belt Pack with
registered IDs, this screen is not displayed.
3
Select the All-In-One Headsets or Belt Packs
that will be registered in a group.
that will be registered in a group.
w
p Set the All-In-One Headsets or Belt Packs to be
registered in a group to [ON].
w
p Set the All-In-One Headsets or Belt Packs to be
deleted from a group to [OFF].
w
p When deleting all All-In-One Headsets or Belt Packs
from a group, touch the [Clear] button.
Default setting: All OFF
w
p If you touch the [Clear] button, the following
confirmation pop-up screen is displayed. To delete
from the group, touch the [YES] button. To cancel
deletion, touch the [NO] button.
from the group, touch the [YES] button. To cancel
deletion, touch the [NO] button.
WX-CC411_PGQP1742ZA_SI_.indb 16
2014/01/17 18:11:19