Triton Tools TLS 사용자 설명서

General Safety Rules

Read and understand all

instructions. Failure to follow all

instructions listed below, may result

in electric shock, ﬁre and/or serious

personal injury.
The term “power tool” in all of the

warnings listed below refers to your

mains-operated (corded) power tool

or battery operated (cordless)

power tool.

SAVE THESE

SAFETY INSTRUCTIONS

•

Keep your work area clean

and well lit. Cluttered benches

and dark areas invite accidents.

• Do not operate power tools

in an environment where

explosive or corrosive gases

could be present. Power tools

create sparks which may ignite

fumes. Avoid areas where there

is excessive dampness or humidity.

• Keep children, bystanders and

visitors away while operating

the power tool. Distractions can

cause you to lose control.

• Always set up or ﬁx the tool

in a stable position.

ELECTRICAL SAFETY

• Power tool plugs must match

the outlet. Never modify the plug

in any way. Do not use any adaptor

plugs with earthed (grounded)

power tools. Unmodiﬁed plugs and

matching outlets will reduce risk of

electric shock.

• Avoid body contact with

earthed grounded surfaces

such as pipes, radiators, ranges

and refrigerators. There is an

increased risk of electric shock if

your body is earthed or grounded.

• Do not expose power tools to

rain or wet conditions. Water

entering a power tool will increase

the risk of electric shock.

•

Do not abuse the cord.

Never use the cord for carrying,

pulling or unplugging the power

tool. Keep cord away from heat,

oil, sharp edges or moving parts.

Damaged or entangled cords

increase the risk of electric shock.

• When operating a power tool

outdoors, use an extension

cord suitable for outdoor

use. Use of a cord suitable for

outdoor use reduces the risk

of electric shock.

• Never yank the cord to

disconnect if from socket.

Keep the cord away from heat

and sharp edges.

PERSONAL SAFETY

• Stay alert, watch what you are

doing, and use common sense

when operating a power tool.

Do not use tool while tired or

under the inﬂuence of drugs,

alcohol, or medication. A moment

of inattention while operating

power tools may result in serious

personal injury.

GENERAL SAFETY RULES

1. Trigger switch
2. Forward / reverse switch
3. Hex drive
4. Charger connection point
5. Charge indicator
6. Charger
7. Driver bits:

8. Magnetic extension

FEATURES

Bits

Qty

Sizes

Slotted (50mm)

Philips (50mm)

Philips (25mm)

#0, 1, 2, 3

Slotted (25mm)

#4, 5, 6, 7mm

Hex (25mm)

#3, 4, 5, 6mm

Star (25mm)

T15, T20, T25, T30

Features