Tektronix Camcorder 2200 사용자 설명서
2-60
Section 2— Control Panel Descriptions
A new duration may be entered as follows on the E-MEM keypad:
S S S • F F • f ENTER
1
The keyframe duration is then applied to all delegated levels by
pressing
pressing
MODify
once.
The
EFFect DUR
button is provided for future editing operations.
PREV
and
NEXT
are used to step the effect forward or backward to
the next keyframe on the Master Timeline.
When the
PREV
or
NEXT
button is pressed, it high-tallies for one-
half second to confirm the operation.
The
PREV
button is off at the beginning of an effect or if the effect
has zero or one keyframe. The
NEXT
button is off at the end of an
effect or when the effect has zero or one keyframe.
GO TO TIME
enables positioning of the effect to a specific position
on the Master Timeline. When
GO TO TIME
is active, the desired
time is entered as follows on the E-MEM keypad:
SSS•FF•fENTER
where SSS=Seconds, FF=Frames, and f=field(s) of the desired
point in time
point in time
or as abbreviated above under
KF DUR
.
GO TO KF
moves the Time Cursor to the specified keyframe on the
Master Timeline.
1. Not all digits are required for defining the time. The system will recognize the
•
button presses to de-
termine which digits are seconds, which are frames, and which are fields. For instance, to enter 2
seconds and 5 frames (65 frames or 130 fields), you would need only to enter:
seconds and 5 frames (65 frames or 130 fields), you would need only to enter:
2 • 5 ENTER
or
• 6 5 ENTER
or
• • 1 3 0 ENTER
In all of these cases, the display will show:
KF DUR 002:05.0
Effect
Dur
Dur
Next
Prev
Go To
Time
Time
Go To
KF
KF