Tandberg Data 3000MXP 사용자 설명서
TANDBERG 3000 MXP User Manual
14
2.4 System Configuration
The system must be configured for each installation. Configuration settings can be made via
the system menu.
Navigate through the menu system using the arrow keys and OK. Remember to press the
Save button on the bottom of each menu to save your changes. Press Cancel (x) to return to
the previous Menu. See next section for more information about how to use the menus and
the remote control.
General configuration:
1. Open the General Settings menu
Press OK to open the Main Menu (if it is not already open).
Select Control Panel and then select Administrator Settings. Select General to
open the General Settings menu.
Select Control Panel and then select Administrator Settings. Select General to
open the General Settings menu.
2. Language
Press OK in the Language field and select the language you want to use from the
list.
list.
3. System Name
Enter a name in the System Name field using the number keys on the remote
control, as you would do with a mobile or cellular phone.
control, as you would do with a mobile or cellular phone.
4. Dual Monitor
If you are using two monitors, set Dual Monitor to On. If you are using one
monitor, set Dual Monitor to Off.
monitor, set Dual Monitor to Off.
5. Auto Answer, Max Call Length, Access code and Permissions
Leave Auto Answer, Max Call Length, Access code and Permissions unchanged
if no special needs are required. See chapter 4.1 General Settings for more
information.
if no special needs are required. See chapter 4.1 General Settings for more
information.