Tandberg Data 3000MXP 사용자 설명서
3 General Use
19
3.2.1 Navigation
Arrow keys and OK
Navigate in the menu with arrow keys. The yellow selector on screen
shows the selected item. Press OK to select.
Cancel key
In the main menu, pressing Cancel (X) will hide the menu. If the menu
is hidden, bring it back with OK. In other menus, pressing Cancel (X)
takes you one step back. In an input field, pressing Cancel (X) will
delete characters/numbers to the left.
In the main menu, pressing Cancel (X) will hide the menu. If the menu
is hidden, bring it back with OK. In other menus, pressing Cancel (X)
takes you one step back. In an input field, pressing Cancel (X) will
delete characters/numbers to the left.
Back/Cancel button
The X button in the menu corresponds with the X key on the remote.
3.2.2 Selfview
Selfview shows your outgoing picture. Normally this is the picture of your self (main camera).
Selfview is most useful for single monitor systems. On dual monitor systems you already have
selfview on the dual monitor. In a normal conference, the far end side is displayed on main
monitor. Pressing Selfview will result in near end on main monitor. Outside a call, selfview is
already displayed on the screens. Pressing selfview will result in a black screen. Press
selfview again to bring the picture back.
How to use Selfview:
1. Press Selfview once to see a full screen picture of yourself (your outgoing video).
2. Press Selfview again to turn selfview off and go back to normal.
2. Press Selfview again to turn selfview off and go back to normal.
3.2.3 Layout
The Layout button has two behaviors depending on the Picture Layout setting in Administrator
Settings (see chapter 4.1.8 Screen Settings). It can provide either a Picture in Picture or a
Picture outside Picture.
3.2.3.1 Picture in Picture
With Picture in Picture (PIP), Layout makes it possible to see an extra picture in a smaller
view. Pressing Layout will bring up a picture in picture in the corner of the screen. Press
Layout again to move it to the other corners of the screen and finally hide it. You can also
hide it directly by pressing and holding Layout for 1 second. Picture in picture will always
appear on the main monitor. Automatic PIP is the system's default setting. That means that
you will automatically show Picture in Picture when it is suitable (see chapter 4.3 Presentation
Settings).
view. Pressing Layout will bring up a picture in picture in the corner of the screen. Press
Layout again to move it to the other corners of the screen and finally hide it. You can also
hide it directly by pressing and holding Layout for 1 second. Picture in picture will always
appear on the main monitor. Automatic PIP is the system's default setting. That means that
you will automatically show Picture in Picture when it is suitable (see chapter 4.3 Presentation
Settings).