Toshiba SR-C8002 사양 가이드

19/24

SR-C8002 Rev.1.0

8.1. Analog Out --- in case of the attenuator is set at 0 dB by the command ---

(1) Output Level

0.8 V (rms)+/-1 dB

(2) Type

Unbalanced

(3) Load Impedance

47 kOHM min

(4) Frequency Response

20 Hz to 20 kHz+/-3.0 dB. (at 47 kOHM Load)

(5) Distortion

0.04 % Max. (at 1 kHz w/20 kHz LPF)

(6) Signal to Noise Ratio

80dB Typ (IEC179 A-Weighted)

8.2. Audio Modes

(1) 16 Modes including 'Stereo', 'Lch Mono', 'Rch Mono' and 'Mute' are selectable by command.

Default mode is 'Stereo'. 

(2) 16 Steps of attenuation level for the Audio Output is selectable by command.

Default level is 0 dB.

9.1. Master Mode Setting

Short-circuit the PIN 47 and PIN 48 of I/O connectors.

9.2.Slave Mode Setting

Open the PIN 47 of I/O connectors.

(Optional)

9.1. Master Mode Setting

Open the PIN 47 of I/O connectors.

9.2. Slave Mode Setting

Short-circuit the PIN 47 and PIN 48 of I/O connectors.