Oregon Scientific 900MHz Cordless Phone with Kitch Companion OS6976 사용자 설명서
EN
4 –1/4” Spacers
4 – Washers
4 –1/2” Spacers
4 – Cord hooks
4 – 1” Spacers
4 – 2” Phillips head screws
1 – Mounting template
CAUTION: To reduce the risk of fire, do not place any heating or cooking product
beneath this unit.
beneath this unit.
• Select a location to mount the Spacemaker®
• Make sure that there is an electrical outlet nearby
• Follow the section of Installing the Phone and Telephone Operation to check if the phone works
well at the selected location
• Follow the section of Radio Operation to check if the radio works well at the selected location
• Disconnect the AC power supply to the Spacemaker®
when mounting.
Empty the contents of the cabinet under which the unit is to be mounted and thoroughly clean the
underside to remove any greasy residue. We recommend the unit be mounted at the front edge of
the cabinet.
underside to remove any greasy residue. We recommend the unit be mounted at the front edge of
the cabinet.
IMPORTANT: For secure mounting, the screws must go into the unit to a depth of at least 3/8". If the
overall length from the bottom of the cabinet shelf to the bottom of the overhang is more than 5/8",
you will need to use a wood shim. The shim can be located between the cabinet shelf bottom and
the spacers. Make sure the wood is at least as thick as the excess over 5/8". If a shim is necessary,
longer screws (available at most local hardware stores) are required.
overall length from the bottom of the cabinet shelf to the bottom of the overhang is more than 5/8",
you will need to use a wood shim. The shim can be located between the cabinet shelf bottom and
the spacers. Make sure the wood is at least as thick as the excess over 5/8". If a shim is necessary,
longer screws (available at most local hardware stores) are required.
Printed in China
Model 26976A
CUT OUT ON SOLID BLACK LINE.
CORTE SOBRE LA LÕ
NEA S” LIDA NEGRA.
CUT
O
UT
ON
SOLID
B
LA
CK
LINE.
COR
T
E
S
OBRE
L
A
L
ÕNEA
S
”
L
ID
A
N
EGRA.
CUT OUT ON SOLID BLACK LINE.
CORTE SOBRE LA LÕ
NEA S” LIDA NEGRA.
Fold Guidelines for
Cabinet with overhang.
Cabinet with overhang.
LÌneas de guÌa para ser dobladas
en la parte sobresaliente de los gabinetes.
en la parte sobresaliente de los gabinetes.
Si no hay una parte sobresaliente
la parte delantera de la Plantilla
debe ser igual con el borde
delantero del Cabinete.
If no overhang
Front edge of Template should
be even with front edge of Cabinet.
FRONT
FRENTE
CUT
O
UT
ON
SOLID
B
LA
CK
LINE.
COR
T
E
S
OBRE
L
A
L
ÕNEA
S
”
L
ID
A
N
EGRA.
SEE INSTRUCTION BOOK:
Be sure to select the correct height provided
spacers to position this unit at the proper distance
below the front edge of your cabinet. This will
provide access to the handset. Handset will be
slightly below the bottom of your cabinet when
properly installed.
Be sure to select the correct height provided
spacers to position this unit at the proper distance
below the front edge of your cabinet. This will
provide access to the handset. Handset will be
slightly below the bottom of your cabinet when
properly installed.
MOUNTING HARDWARE PACKED WITH YOUR UNIT
BEFORE MOUNTING
8
os6976-en1.p65
5/6/2005, 10:32 AM
11