Crown Equipment Walkie Stackers WE 2300 Series 사용자 설명서

Technical Information

Standard Equipment
1. Four-point suspension with

centrally located handle

2. Traction speed control

(MOSFET)

3. Variable traction speed

forward and reverse

4. One-speed lift, two-speed

lower

5. Electric brake

6. Brake override

7. Key switch

8. Horn

9. Compound drive and lift

motor

10. Emergency power 

disconnect

11. Battery connector SB-175

12. Reversing button

13. Hour meter

14. Vulkollan tires

15. 27" x 42" fork configuration

Optional Equipment
1.

Pivoting tandem load 
wheels 3.2" x 2.3" 
(WE 2300-25 only)

2.

Battery compartment rollers

3.

Battery discharge indicator
with low battery lift interrupt
and hour meter

4.

Freezer corrosion conditioning,
continuous -30° C / -22° F,
intermittent - 40° C / - 40° F

5.

Load backrest

6.

Maintenance-free battery
pack

Electrical System
24-volt electrical system
incorporating:
1. Transistor “MOSFET” 

controller, microprocessor
controlled with on-board 
service diagnostic capability.
This transistor controller 
provides many benefits 
such as maximum energy 
efficiency, reduced 
maintenance and infinite
speed control capability.

Fault Monitoring System:
Through a fault flash code 
signaled by an LED, 17
detectable faults can be 
recognized. Using an optional
hand set, faults can be displayed
digitally. Controller settings are
programmable. Functional 
tests of components are also
possible. Incorporates storage
register for fault history that can
be interrogated by service 
personnel.

2. Heavy-duty drive and lift

motors provide high reliability
and efficiency.

3. Electric panel with swing-out

feature, allows good acces-
sibility and serviceability to
the distribution panel and all
other electrical components.

4. Emergency disconnect is

easily accessible from all
operating positions.

5. Solid-state switching ensures

high component reliability.

6. Control and power circuits

are fused. Distribution panel
and controller are short-
circuit protected.

7. All wiring is color coded.

Hydraulic System
1. Heavy-duty compound

motor and gear pump
selected for optimum lift
performance and low noise.

2. Control block houses 

proportional pressure 
compensated flow control
valve, check valve, relief
valve and direction control
valve to select lower 
function. The proportional
valve ensures smooth load
handling. Single speed lift
and two speed lowering is
available to the operator.

3. Cylinder rods are hard-plated

chrome with polyurethane
seals.

4. Relief valve tuned to capacity

protects all components in
the hydraulic system.

Drive Unit/Brake
Heavy-duty gear box with 
helical spur input gear for low
noise emission. Drive unit is
equipped with an electro-
magnetic brake, spring applied,
electrically released. The brake
is activated by the control 
handle position.

Frame/Pivoting Carriage
Frame and Articulated Truck
Suspension system (ATS) are 
of a rugged design ensuring
minimum deflections during
operation. Modular pivoting 
carriage design ensures excellent
traction, optimum truck stability
and minimum steering effort in
all load conditions. Easy service-
ability of all components in
power unit and simple adjust-
ment to compensate for tire
wear is possible. Single swing-
out door design allows easy
access to all components.

Mast
High visibility two- and three-
stage mast design features
nested I-beams and canted
rollers. Lift cylinders are posi-
tioned in outer I-beam profile for
best visibility through mast and
clear view onto fork tips during
load handling. Standard 
equipment includes full-free lift
for two- and three-stage mast. 
Mast cushioning between
stages ensures smooth 
operation. Heavy-duty mast 
and chain rollers are sealed 
and lubricated for life. Easy
access to carriage rollers.

Operator Controls
The robust X10™ control 
handle is designed to allow for
an optimum turning radius with
low steer effort. All control 
buttons can be operated with
either hand and can be
accessed with minimum hand
and wrist movement. The horn
buttons are integrated in the
hand grips. An ergonomic 
forward/reverse thumb wheel
allows for precise maneuvering.

Depending on conditions and
operator experience, maximum
travel speed can be reduced 
via the rabbit/turtle switch.
Exclusive brake override allows
slow speed travel with the 
handle near vertical. This feature
improves maneuverability in
tight areas.

Battery
Removable side panels and top
hinged cover allow easy access
to battery, as well as battery
change in three directions,
either side or top lift out.
Compartment rollers are fitted
as an option.

Other Options
1. Audible travel alarm

2. Flashing lights

Safety considerations and 
dangers associated with audible 
travel alarms and flashing lights
include:

• Multiple alarms and/or lights 

can cause confusion.

• Workers ignore the alarms 

and/or lights after day-in and 
day-out exposure.

• Operator may transfer the 

responsibility for “looking out” 
to the pedestrians.

• Annoys operators and 

pedestrians.