JLab Crasher Bluetooth Wireless Stereo Speaker CRSHER 사용자 설명서
2 above) for 12
– 15 seconds until the 4 LED lights begin to blink
MAKE & RECEIVE TELEPHONE CALLS
1.
If a call is received while streaming music on speaker, the music will be muted and a ring tone will be heard
in its place.
in its place.
2.
Answer and end calls by pressing the talk button once (see item 7 above).
3.
Make calls by dialing on the cell phone and talking towards the speaker. Talk at a normal volume from 3
– 5
feet away.
4.
To decline an incoming call, hold the talk button (see item 7 above) for 2
– 3 seconds or until the phone call
stops ringing and returns to your music.
4. Check the instruction manual for your cell phone to ensure no further steps are required.
PLUG & PLAY NON BT DEVICES WITH AUX CABLE
1.
Connect the speaker with almost any audio device directly by using the supplied 3.5mm cable.
2. Connect one end of the 3.5mm cable to the audio in port on the Crasher (see item 5 above) and the other
end of the cable to the 3.5mm audio port on your favorite devices.
3.
While connected, this 3.5mm aux line in will override any Bluetooth wireless music being played. Once the
3.5mm device is disconnected from the aux connection, the Crasher will return to the music on the
Bluetooth connected device.
3.5mm device is disconnected from the aux connection, the Crasher will return to the music on the
Bluetooth connected device.
4.
When connected via the 3.5mm aux cable, the Crasher's volume control is overridden by the volume
settings of your device. As you would headphones, volume should be controlled through your audio
device when connected via aux.
settings of your device. As you would headphones, volume should be controlled through your audio
device when connected via aux.
CHECK THE BATTERY LIFE
1.
The speaker is designed with a smart battery check feature for your convenience.
2.
One click of the battery check button (see item 2 above) will show you the current battery capacity on your
Crasher
Crasher
4 LEDs light up = app. 100%full
3 LEDs light up = app. 75% full
2 LEDs light up = app. 50% full
1 LED lights up = app. 25% full (indicating charging is needed)
CHARGE YOUR PORTABLE DEVICES ON THE GO
1.
The Crasher delivers a portable battery pack that can charge your favorite music devices on-the-go
including smartphones, iPhones, MP3 Players and more.
including smartphones, iPhones, MP3 Players and more.
2.
Connect your portable device with its own charging cable (not included) to the USB jack on the Crasher
speaker (see item 10 above).
speaker (see item 10 above).
3.
This portable backup power supply allows you to listen to your music without interruption.
4.
The built-in power pack will supply a current of 1A. This will charge most smartphones and portable
devices. Some tablets, including the iPad, require at least 2.1A of power to charge up quickly or if their
battery is less than 30%. While the Crasher's power pack might not charge certain tablets as fast as it
would a smartphone, it can still offer a power boost when your tablet's battery is over 30%.
devices. Some tablets, including the iPad, require at least 2.1A of power to charge up quickly or if their
battery is less than 30%. While the Crasher's power pack might not charge certain tablets as fast as it
would a smartphone, it can still offer a power boost when your tablet's battery is over 30%.
SPECS
AUDIO
Custom Fine Tuned Acoustic Drivers (Stereo Pair)
Dual Passive Built-In Subwoofer
Built-in Microphone (IEEE 1329 Type 1-compliant speakerphone)
20Hz
Custom Fine Tuned Acoustic Drivers (Stereo Pair)
Dual Passive Built-In Subwoofer
Built-in Microphone (IEEE 1329 Type 1-compliant speakerphone)
20Hz
– 20kHz Frequency Response
Distortion 0.5%
CUSTOMIZE IT
Select from Black, Purple/Teal, Silver/White and Gun Metal/Green
Select from Black, Purple/Teal, Silver/White and Gun Metal/Green
BATTERY AND POWER
On/Off Switch
Up to 18 hours continuous play
Built in rechargeable lithium-ion battery
On/Off Switch
Up to 18 hours continuous play
Built in rechargeable lithium-ion battery