Furuno IF-NMEASC 사용자 설명서
10
5.
MAINTENANCE, TROUBLE-
SHOOTING
SHOOTING
This chapter provides the information for keeping your unit in good working order.
5.1
Preventive Maintenance
Regular maintenance is important for good performance. Following the procedures in the table be-
low will help maintain performance
low will help maintain performance
Preventive maintenance
Item
Check point
Remedy
Cabling
Visually check cabling for
signs of wear and damage.
signs of wear and damage.
Replace damaged cables.
Ground
Check ground wire.
Check that ground wire is tightly fastened.
Check ground point for corrosion.
Check ground point for corrosion.
Cover
Cleanliness of cover.
Dust can be removed with a soft cloth. Do not use
chemical based cleaners to clean the cover, as they
can remove paint and markings and deform the cov-
er.
chemical based cleaners to clean the cover, as they
can remove paint and markings and deform the cov-
er.
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel
should work inside the
equipment.
should work inside the
equipment.
NOTICE
Do not apply paint, anti-corrosive
sealant or contact spray to coating
or plastic parts of the equipment.
sealant or contact spray to coating
or plastic parts of the equipment.
Those items contain organic solvents
that can damage coating and plastic
parts, especially plastic connectors.
that can damage coating and plastic
parts, especially plastic connectors.