Fortress Technologies FS-20 사용자 설명서

다운로드
페이지 16
 
12 
OPTION PROGRAMMING 
 
 
6. ACTIVE RE-ARMING 
Active Re-arming allows the system to re-arm itself 30 seconds after disarmed with the transmitter if a door has 
not been opened.  This is handy if the vehicle is accidentally disarmed (via the Transmitter in your pocket) without 
you  knowing  it.  Note:  Active  re-arm  is  reset  by  dome  light  illumination.    If  you  are  using  dome  light  illumination, 
active re-arm will not function. 
 
 
7. DOUBLE UNLOCK PULSE 
With this feature enabled, the unit will send 2 unlock pulses when the #2 Unlock button is pressed.  2 pulses are 
required  for  interfacing  into  some  existing  Factory  Keyless  Entry  or  Alarm  systems  on  vehicles  such  as  Nissan, 
VW, Toyota, and Lexus vehicles. 
 
8. SILENT ARMING /DISARMING (CHIRP DEFEAT) 
With  this  feature,  the  system  can  be  Arm  and  Disarm  without  the  siren  chirp  using  button  #1  &  #2.    Flashing 
parking lights will be the only Arm/Disarm confirmation. 
 
9. PARKING LIGHTS ON WITH DISARM 
Keeps  parking  lights  on  instead  of  2  flashes  when  system  is  disarmed  to  assist  in  locating  your  vehicle  in  a 
crowded parking lot or structure.  Light will stay on for 30 Sec. or until Ignition is turned on. 
 
10. DISARM WITH AUX. OUTPUT 1 (TRUNK POP) 
Controls  whether  the  system  will  or  will  not  DISARM  when  the  trunk  pop  or  AUX.  feature  is  used.    When  the 
feature is turned on the unit will DISARM when opening trunk or using an auxiliary device controlled by the Gray 
output wire. 
 
11. N/A, NO OPTION 
 
12. DOOR LOCK/UNLOCK PULSE TIME 
Controls the amount of time (0.75 sec. or 3 sec.) for the lock/unlock pulse.  The 3 sec. setting may be required for 
1980’/90’s European Vehicles that require a long pulse to do Vacuum door lock systems. 
 
13. ACTIVE, PASSIVE, or FULL-TIME CARJACK PROTECTION 
This feature controls the type of Carjack protection the alarm will provide.  There are 3 selections: Button 1 (Lock) 
= Active protection.  Button 2 (Unlock) = Passive protection.  Button 3 (Trunk) = Full-Time protection.  Option 
number 14 must be enabled to allow Carjack functions to operate.  See Carjack Protection features.