Moxa Technologies Personal Computer V481-XPE 전단

 

— 1 — 

— 2 — 

— 3 — 

 

The ThinkCore V481 is an industrial, ready-to-run embedded computer 
that supports VGA and audio, and comes with dual LAN ports, 8 serial 
ports, a CompactFlash slot, and a USB port. The V481 is based on the 
Intel x86 processor. The VGA interface makes the V481 especially 
well-suited for industrial applications, such as SCADA, factory 
automation, and applications that require an onsite HMI or monitor. 

2. Package Checklist 

Before installing the ThinkCore V481, verify that the package contains 
the following items: 
y  1 ThinkCore V481 
y  Quick Installation Guide (this guide) 
y  Document and Software CD 
y  Din-rail Mounting Kit 
y  100 cm RJ45-to-RJ45 Ethernet Cross-over Cable 
y  20 cm Y-type Cable for Keyboard and Mouse 

(CBL-MiniDIN6P/6Px2-20) 

y  Terminal Block to Power Jack Converter (includes Terminal Block) 
y  Product Warranty Statement 
 

Optional Accessories 
y  Switching power adaptor for the ThinkCore V481: 

60W, 24 VDC output, 100 to 240 VAC input (power cord must be 
ordered separately); Order No.: 1117224250210 

y  Power Cords: 

Power cord with Australian plug; Order No.: 1705010700510 
Power cord with UK plug; Order No.: 1705010700410 
Power cord with Euro plug; Order No.: 1705010700210 
Power cord with straight US plug; Order No.: 1705010700110 
 

The following figures show the panel layouts of the ThinkCore V481. 

 

 

 

 

LED Indicators 
There are 6 LED indicators located on the front panel of the ThinkCore 
V481. 

 

 

 

LED Color 

LED Function 

Green 

Power is on 

Power 

Off 

No power is being received, or 
power error exists 

Yellow/Blinking 

Data is being written to or read 
form the storage unit 

Storage

Off 

Storage unit is idle 

Yellow Tx/Link 

Link LED

Off 

Disconnected, or short circuit 
exists 

Orange 

(LAN2 Only)

1000 Mbps Ethernet Mode 
(Gigabit Ethernet) 

Green 

100 Mbps Ethernet Mode 

LAN 1 
LAN 2 

Mode LED

Off 

10 Mbps Ethernet Mode 

Wall or Cabinet Mounting 
The ThinkCore V481 has built-in “ears” for attaching the embedded 
computer to a wall or the inside of a cabinet. We suggest using two 
screws per ear. 

DIN-Rail Mounting 
An aluminum DIN-Rail mounting kit is a standard accessory. If you need 
to reattach the DIN-Rail mounting kit to the ThinkCore V481, make sure 
the stiff metal spring is situated towards the top, as shown in the 
following figures. Follow Steps 1 and 2 to mount the V481 on the 
DIN-Rail. 

To remove V481 from Din-rail, simply reverse Steps 1 and 2

. 

Power Connector 
Connect the 9 to 36 VDC LPS or Class 2 power line to the ThinkCore 
V481’s terminal block. If the power is properly supplied, the Power LED 
will light up. 

Grounding the V481 
Grounding and wire routing help limit the effects of noise due to 
electromagnetic interference (EMI). Run the ground connection from the 
ground screw to the grounding surface prior to connecting the power. 

STEP1: Insert the top of the 
DIN-Rail into the slot just below the 
stiff metal spring. 

STEP2: The DIN-Rail attachment 
unit will snap into place as shown.