Clarke IG1000 작동 가이드

9

NOTE: Place the generator on a level surface and check the oil level as 

follows.

1. Remove the left side maintenance panel.

2. Turn the oil filler cap anti-

clockwise and remove from the oil 
reservoir, wipe the dipstick with a 
clean cloth.

3. Insert the dipstick back into the oil 

filler tube and then remove it 
again. Do not screw in the oil filler 
cap/dipstick when doing this.

4.

Max Level

Min. Level

If the oil is below the Min. level on 
the dipstick, add oil to the oil 
reservoir.

• Oil Capacity (See 

“Specifications” on page 23)

• We recommend the use of 

SAE30 oil in this generator.

• Do not tilt the generator when 

adding engine oil. This could 
result in overfilling and damage 
to the engine.

5. Replace the oil filler cap.