Alsoft DiskWarrior - 4.0 지침 매뉴얼

These messages appear in the main window and describe the status of the selected disk.

❏ Directory is ready to be rebuilt.

Click Rebuild to rebuild the selected disk.

❏ Directory cannot be rebuilt because this is the startup disk.

Your startup disk is the disk containing the current System folder. The selected disk is the startup 
disk. To rebuild this disk, refer to Rebuilding Your HFS and HFS Plus Disks on page 23, 
"Chapter 2: Using DiskWarrior."

❏ Directory cannot be rebuilt because DiskWarrior resides on this disk.

DiskWarrior cannot rebuild the directory of the disk on which it resides. To rebuild the directory 
of this disk, copy DiskWarrior to another disk, such as a FireWire disk, and run that copy of 
DiskWarrior.

❏ Directory cannot be replaced because this disk is locked.

This disk is not writable. You need to unlock the disk.

❏ Directory cannot be rebuilt because an error occurred trying to access this 

This status message indicates that DiskWarrior was unable to access this disk. This could be 
evidence of a bad block on the disk, a hardware defect, or problems with termination or cabling.

❏ This disk is a [Mac OS Standard or Mac OS Extended] disk.

❏ This disk appears to be a [Mac OS Standard or Mac OS Extended] disk.

The disk does not appear on the Desktop. A quick exam of the disk was made to try to determine 
its format. The actual format will be determined, if possible, while rebuilding.

❏ This disk does not appear on the Desktop.

❏ Directory has been successfully rebuilt and replaced.