Motorola Car Satellite TV System DCH3200 사용자 설명서
4 DIAGNOSTICS
55
Interactive Status
This diagnostic describes the interactive information that is displayed only when Thin
Client platform is running. The information on the OSD and front panel is updated at
least once every 5 seconds while the diagnostic is displayed. This is an example of a
code module display with status descriptions:
Client platform is running. The information on the OSD and front panel is updated at
least once every 5 seconds while the diagnostic is displayed. This is an example of a
code module display with status descriptions:
Figure 4-10 Interactive status front panel display
The Interactive Status fields are:
Field Description
IP Address
The IP address in dotted-decimal format xxx.xxx.xxx.xxx assigned by the NC 1500 to the
DCH3200. 0.0.0.0 is displayed if the IP address is not configured or unknown.
DCH3200. 0.0.0.0 is displayed if the IP address is not configured or unknown.
UPM
The upstream modem address value is the same as the terminal ID assigned by the
DAC 6000. It is a unique, system-generated, eight-digit integer between 1 and 16777215.
00000000 is displayed when the UPM is not configured or if it is unknown.
DAC 6000. It is a unique, system-generated, eight-digit integer between 1 and 16777215.
00000000 is displayed when the UPM is not configured or if it is unknown.
Upstream
ID
ID
A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the DCH3200.
0000 is displayed if the Upstream ID is not configured or if it is unknown.
0000 is displayed if the Upstream ID is not configured or if it is unknown.
Downstrea
m ID
m ID
A four-digit decimal value from 0000 to 9999 assigned by the DAC 6000 to the DCH3200.
0000 is displayed if the Downstream ID is not configured or if it is unknown.
0000 is displayed if the Downstream ID is not configured or if it is unknown.
State
The interactive status of the DCH3200:
Front
Panel
Panel
OSD Description
U
UNCONFIG
The DCH3200 is not configured for the interactive system,
and the platform should run as pre-interactive.
and the platform should run as pre-interactive.
C
MAC_CONNECT
The DCH3200 is waiting to establish connection to MAC PID
Stream.
Stream.