AirLink AP671W 사용자 매뉴얼

 20

Band 

Please select the wireless band you wish to use. By selecting 
different band setting, you’ll be able to allow or deny the wireless 
client of a certain band.  
 
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless 
clients using the wireless band you select (802.11b, 802.11 Draft-N, 
or 802.11g) will be able to connect to this access point. 
 
If you select 2.4GHz (B+G), then only wireless clients using 802.11b 
and 802.11g band will be able to connect to this access point.  
 
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to 
connect to this access point, select 2.4GHz (B+G+N). 
 

Main ESSID 

Please input the ESSID (the name used to identify this wireless 
access point) here. You can input up to 32 alphanumerical 
characters. PLEASE NOTE THAT ESSID IS CASE SENSITIVE. 
 

Multiple ESSID 

The access point supports multiple SSID function; up to 3 SSIDs can 
be set. If you want to configure additional SSIDs, please click this 
button. For detailed descriptions of the function, please refer to 
Section 2.4.1.1. 
 

Channel  
Number 

Please select a channel number you wish to use. If you know a 
certain channel number is being used by other wireless access points 
nearby, please refrain from using the same channel number 
 

Associated Clients 

Click ‘Show Active Clients’ button and a new popup window will 
appear which contains the information about all wireless clients 
connected to this access point. You can click ‘Refresh’ button in 
popup window to keep information up-to-date. 
 

 

After you finish with setting, please click ‘Apply’, and the following message will be displayed: 
After you clicked Apply, the following message will be displayed on your web browser:  
 

 

 
You can click “Continue” to back to previous setup page to continue on other setup procedures, 
or click “Apply” to reboot the router so the settings will take effect (Please wait for 30 seconds 
while router is rebooting).