AirLink AP671W 사용자 매뉴얼

 30

Diagram 5: WDS Bridge mode application 

When you select ‘AP Bridge-WDS’, the following options will be displayed: 
 

 

Here are descriptions of every setup item: 
 

Band 

Please select the wireless band you wish to use. By selecting 
different band setting, you’ll be able to allow or deny the wireless 
client of a certain band.  
 
If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless 
clients using the wireless band you select (802.11b, 802.11 Draft-N, 
or 802.11g) will be able to connect to this access point. 
 
If you select 2.4GHz (B+G), then only wireless clients using 802.11b 
and 802.11g band will be able to connect to this access point.  
 
If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to 
connect to this access point, select 2.4GHz (B+G+N). 
 

MAIN ESSID 

Please input the ESSID (the name used to identify this wireless 
access point) here. You can input up to 32 alphanumerical 
characters. PLEASE NOTE   THAT ESSID IS CASE SENSITIVE. 
 

Multiple ESSID 

The access point supports multiple SSID function; up to 3 SSIDs can 
be set. If you want to configure additional SSIDs, please click this 
button. For detailed descriptions of the function, please refer to 
Section 2.4.1.1. 
 

Channel  
Number 

Please select a channel number you wish to use. The channel 
number must be same with another wireless access point you wish to 
connect.