Advantech Modem ADAM-4550 사용자 설명서
16
ADAM-4550 User's Manual
3.1 A Test Sample
1.
Follow procedures in section C to install one
ADAM-4550 unit as the MASTER module
for a controlling PC and two ADAM-4550s
as SLAVEs for the remote devices (see Fig.
3).
ADAM-4550 unit as the MASTER module
for a controlling PC and two ADAM-4550s
as SLAVEs for the remote devices (see Fig.
3).
2.
Start the ADAM Configuration and Diagnos-
tic Program on the controlling PC. Select
Generate-Traffic menu and choose Send
One Packet. In the window area type in
{AADDD...... (cr)} where { is the delimiter
selected when configuring the ADAM-4550
units, AA is the hexadecimal unit ID address
and DDD...... is the data. The transmitted
data DDD...... should be displayed on the
PC monitor connected to the remote
ADAM-4550.
tic Program on the controlling PC. Select
Generate-Traffic menu and choose Send
One Packet. In the window area type in
{AADDD...... (cr)} where { is the delimiter
selected when configuring the ADAM-4550
units, AA is the hexadecimal unit ID address
and DDD...... is the data. The transmitted
data DDD...... should be displayed on the
PC monitor connected to the remote
ADAM-4550.