JVC Switch K3-R 사용자 설명서
Technical Support: 201-934-5111
Main: 201-934-9944
tech@dataprobe.com
Website: dataprobe.com
Website: dataprobe.com
General Description
The K3 Series A/B Switching system provide up to 3 AB switches in a 1.75 in rack mount chassis for 19”
Equipment cabinets. Each switch allows a common circuit (COM) to be switched to either of two circuits,
designated A and B. The switches can be controlled locally with a front panel toggle switch and remotely
by; contact closure, or thru a Serial port and Ethernet connection using Telnet, SNMP, or a Web browser.
Modular System
The K3 System consists of the K3 Chassis, Model K3-R and Power, Control and A/B Switch options.
The following table illustrates the available K3 components available at the time of printing. Additional
options may be available; contact Dataprobe.
SKU Model
Description
Base
1150100 K3-R
K3
Chassis
Control
1340062
C-AB-16-R
IP and Serial Control Card, Individual Switch Control
1340065
C-AB-1-R
IP Control Card, Gang Control
1340063
G-AB-1-R
Gang Expansion or GPI Control
Power
1930077
PS-R1-WRI
Internal AC Power Supply 100-240VAC
1930078
PS-R1-48
Internal -48VDC Power Supply
1930079
PS-R1-224
Dual External 24VDC Power Supply. For use with External AC Supply
1930076
PS-WRI-4
External A/C Power Supply
A/B
1110100
AB-R-D25
25 Pin D Subminiature, all 25 pins supported
1110101 AB-R-RJ8
8 Wire Modular Jacks; All leads switched. Supports RJ48C, RJ48S, RJ45 and
all 8 position modular jack specifications, up to16Mhz
all 8 position modular jack specifications, up to16Mhz
1110102
AB-R-2RJ8
Same as above with two ganged switches.
1110103 AB-R-NET
8 Position, 8 Wire Modular Jacks; All leads switched; Supports 10/100/1G
Ethernet Network specifications.
Ethernet Network specifications.
1110104 AB-R-T50
50 Pin Telco (Amphenol) connector. All 50 Leads Switched. Dual Height
Switch must be in Slot 1
Switch must be in Slot 1
1110105 AB-R-M34
34 Pin M Type (V.35) connector. 23 leads switched. Dual Height Switch must
be in Slot 1
be in Slot 1
1920028
AB-FP
Blank Panel for unused A/B Slots. Required for FCC and CE marking
K3 Series
1U Rack Mount A/B Switches
K3_system_v070607e