LG DVD Player BD630C 사용자 설명서

20

C

onnecting

Rear of the unit

Router

Broadband  
service

PC 

If there is a DHCP server on the local area network 
(LAN) via wired connection, this player will 
automatically be allocated an IP address. After 
making the physical connection, a small number of 
home networks may require the player’s network 
setting to be adjusted. Adjust the [NETWORK] 
setting as follow.

Before setting the wired network, you need to 
connect the broadband internet to your home 
network.
1.  Select [Connection Setting] option in the 

[Setup] menu then press ENTER (b). 

2.  Select [Yes] and press ENTER (b) to continue. 

The new connection settings reset the current 
network settings.

3.  Use w/s/a/d to select the IP mode 

between [Dynamic] and [Static].

 

Normally, select [Dynamic] to allocate an IP 
address automatically.

If there is no DHCP server on the network and 
you want to set the IP address manually, select 
[Static] then set [IP Address], [Subnet Mask], 
[Gateway] and [DNS Server] using w/s/

a/d and numerical buttons. If you make a 

mistake while entering a number, press CLEAR 
to clear the highlighted part.

 

,

Note

4.  Select [OK] and press ENTER (b) to apply 

network settings.

5.  The player will ask you to test the network 

connection. Select [OK] and press ENTER (b) to 

complete the network connection.

6.  If you select [Test] and press ENTER (b) at 

step 5 above, the network connection status is 
displayed on the screen. 
You can also test it on the [Connection Status] 
in the [Setup] menu.