Brother MD-611 사용자 매뉴얼

 

BAS-300G, BAS-311G, BAS-326G 

38

If split data (data that causes sewing to pause) exists within a single program, 
the numbers that are used to specify the patterns that are separated by split 
data are called split numbers. 

Pattern 1: Split No. 1 
Pattern 2: Split No. 2 
Pattern 3: Split No. 3 

 
 
 
 
 
 

1. Press the   or   key (1) to select a program number 

for a program that contains split data. 

•  The program number will flash in the PROGRAM No. 

display (2). 

2.  Depress the foot switch to the 2nd step. 

(If using a two-pedal foot switch, lower the work clamp 
before depressing the start switch.) 

•  The feed mechanism will move to the home position 

and the program number will be accepted. 

•  The program number will stop flashing and illuminate 

steadily. 

3. Press the SELECT key (3) so that the SPLIT No. 

indicator (4) illuminates. 

•  The split number will appear in the menu display (5). 

4. Press the   or    key (6) to set the split number. 
 
 

 
 
 
 
 
 
 
 
 

The setting for memory switch No. 403 lets you select the split mode. 
 
[Continuous split] 
Memory switch No. 403 = 0 (Split mode is enabled after split data is detected) 
Memory switch No. 403 = 1 (Split mode is always enabled) 
•  Sewing is carried out each time in the order of steps 1 → 2 → 3 → 1 (for example, if there are two sections of split 

data). 

[Independent split] 
Memory switch No. 403 = 2 
•  The pattern for the displayed split number is sewn independently. 

 
 

4965Q

2nd step 

4964Q 

Pattern 1 

Pattern 2 

Pattern 3