Bosch Appliances Network Router D9210C 사용자 설명서

Access Control Interface Module

 Door Profile | en

Bosch Security Systems, Inc.

Program Entry Guide

F.01U.201.526 | 02 | 2011.10

Use this program item to unlock the door (latched shunt and strike) automatically when the 

entry area is disarmed. The door will re-lock upon Master or Perimeter Arming the area

Yes When the area assigned in D# Entry Area # is disarmed, the door will be in the Unlocked 

state. When that area is armed, the door will return to the Locked state.

No Door state will not be affected by the armed state of the area.

Use this program item to activate the relay for the door strike and shunt the door zone 

automatically upon a Fire Alarm. This feature will override a Secure Door state, Locked Door 

state, Auto Door, and an Interlock faulted point. The relay will activate for all doors with this 

prompt programmed [YES] when a Fire Alarm occurs in any area. Relays that are activated by 

Fire Unlock can only be returned to normal through the Command Center using the Door 

Control function.

Yes Relay will activate and shunt will be applied for the door contact automatically upon a Fire 

Alarm.

No Door will remain in its current mode upon a Fire Alarm.

Use this program item to determine whether the door needs to be physically opened prior to 

disarming the area upon a valid access request. The user initiating the access request must 

have access levels that allow disarming with ID.

Default:

No

Selections:

Yes or No

The Unlocked state cannot be overridden manually.

Doors that are activated by Fire Unlock must be returned to normal using the Door Control 

function on the control center.

Default:

No

Selections:

Yes or No

This will unlock the door regardless of the armed state.

Default:

No

Selections:

Yes or No