Bosch Appliances Computer Monitor UML-273-90 사용자 설명서

6

Menu

Selects the on-screen display (OSD).

7

VIDEO
SOURCE/
ENTER

Selects the signal to be displayed
Serves as the “Enter” function for OSD
menus

The LCD is programmed through the on-screen display (OSD)
menus and submenus where an operator can select operating
parameters. To access the OSD menus, press the Menu button
on the control panel. Use these controls to make any necessary
adjustments to the OSD.

Notice!
When you are navigating through the OSD menus, use the
SOURCE or ENTER button to select a menu and use the MENU
button to exit a menu.

To navigate the set up menus, follow the steps below:
1.

Connect a video source cable to the monitor.

2.

Press the Power button to turn on the unit.

3.

If required, press the SOURCE or ENTER button and then
the and the up and down arrow buttons until a signal is
displayed.

4.

Press the Menu button to activate the main menu
selections.

5.

Press the up and down arrow buttons buttons to select a
menu.

6.

Press the right arrow button to enter the selected menu.

7.

Press the up and down arrow buttons to select a sub-menu
item.

8.

Press the left and right arrow buttons to toggle the OSD
values.

9.

Press the Menu button to exit the selected menu and to
return to the menu bar or to confirm a selection.

10. Press the Menu button again to exit the OSD menu bar.

 

Bosch High Performance
HD LED Monitors

Navigating the Monitor | en

Bosch Security Systems, Inc.

Installation Manual

2013.02 | 3.0 |