Wacom PenPartner - 2 지침 매뉴얼

Page  36

If you encounter problems with your PenPartner2 pen or tablet, refer to the following tables.  Your problem may be 
described here, and you can try the solution offered.  Be sure you refer to the Read Me file for the latest information 
updates.

For more information, visit Wacom’s web site at 

 and follow the links to the FAQs.

The computer does not have an 
available USB port.

Check if there is an available USB port on a USB hub device.  If none are 
available you will need to add a USB hub.

The tablet status LED is off.

Verify that your tablet’s USB cable is properly connected to an active USB 
port.  If you are connecting to a USB hub device, make sure the hub is 
connected to an active USB port and that the hub is active.

The pen works only in M

OUSE

 

M

ODE

, and does not draw with 

pressure-sensitivity.

The tablet driver software was not installed or did not load properly.  
Make sure the tablet driver software is installed and functioning.  Insert the 
Tablet CD into your computer and install the driver software for the tablet.

Some applications, including Photoshop 7.0 and greater, require that you 
turn on the pressure capabilities before the pen will respond as a pressure-
sensitive tool.

Clicking is difficult.

Set the T

IP

 F

EEL

 slider to a softer setting.

Select the C

LICK

 S

OUND

 option (the check box should be checked) so that 

you can hear when the pen registers a mouse click.  Note that your 
computer speakers must be turned on and the volume audible before you 
can hear C

LICK

 S

OUND

.