Wacom CintiQ - 12WX 설치 가이드

Troubleshooting
Page  40

TESTING A PEN

1.

While observing the P

OINTING

 D

EVICE

 I

NFO

 column, bring your pen within 5 mm (0.2 inch) of the 

display screen.  A value for P

ROXIMITY

, the D

EVICE

 N

AME

, D

EVICE

 T

YPE

, and a D

EVICE

 S/N (serial 

number) should be displayed.  If you have more than one Cintiq unit connected to your system, be 
sure to select the unit for which you are testing a pen in the T

ABLET

 I

NFO

 column.

2.

Move your tool along the tablet surface.  The X and Y D

ATA

 values should change to reflect the tool 

position.

3.

Test your pen switches.  The Cintiq status LED should light blue each time you click with the tool 
tip, press the side switch, or press the tool’s eraser to the display screen.

•

Press on the display screen surface with the tool tip – the S

WITCHES

 state and P

RESSURE

 value 

should change.  (P

RESSURE

 should change from approximately 0% with no pressure applied to 

approximately 100% when full pressure is applied.)

•

Next, press the side switch without pressing the tip to the tablet – the S

WITCHES

 state should 

change.  (For the Grip Pen, do this for both positions of the DuoSwitch.)

•

Press the tool’s eraser to the display screen – the S

WITCHES

 state and P

RESSURE

 value should 

change.  (P

RESSURE

 should change from approximately 0% with no pressure applied to 

approximately 100% when full pressure is applied.)

•

For the optional Airbrush, move the fingerwheel forward – the W

HEEL

 value should decrease to 

a value of approximately 0 when the fingerwheel is all the way forward.  Move the fingerwheel 
backward – the W

HEEL

 value should increase to approximately 1000 when the fingerwheel is 

all the way back.

4.

Test tilt for the x-axis by moving the pen from a vertical position toward the right; the X T

ILT

 value 

should change from approximately 0 to +60.  Now move the tool to the left of vertical; the X T

ILT

 

value should change from approximately 0 to -60.

5.

Test the tilt for the y-axis by moving the pen from a vertical position toward the bottom of the 
tablet; the Y T

ILT

 value should change from approximately 0 to +60.  Now move the tool toward 

the top of the tablet; the Y T

ILT

 value should change from approximately 0 to -60.

6.

For the optional 6D Art Pen, test the rotation feature by placing the pen tip on the display screen 
surface and slowing rotating the pen on its axis.  The R

OTATION

 value should change as you rotate 

the pen.

7.

When you are done, click on the C

LOSE

 button to exit the dialog box.

Pen

Tip = 1, DuoSwitch (lower position) = 2, 
DuoSwitch (upper position) = 3, Eraser = 1

Airbrush

Tip = 1, Side Switch = 2, Eraser = 1