Wyse WintermTM 9000 사용자 설명서

This digital apparatus does not exceed the Class B limits for radio noise emissions from 
digital apparatus set out in the Radio Interference Regulations of the Canadian 
Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites 
applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le 
brouillage radioélectrique édicté par le Ministère des Communications du Canada.

These products conform to the requirements of IEC950 and EN60950.

These products conform to requirements of EN55022 for Class A equipment or EN55022 
for Class B equipment (refer to “Terminal Requirements Compliance”).

For use with supplied power adaptor. Replace only with the same or 
equivalent type as recommended by the manufacturer.

For use with External Power Supply DVE Model DSA-0301-05 or certified equivalent 
model supplied by the manufacturer.

For use with External Power Supply Flytech/CARRY-I Model FT-8006A or certified 
equivalent model supplied by the manufacturer.

A noise suppressor (ferrite bead) must be installed on the network cable of your terminal. 
This installation is necessary to maintain compliance with U.S. FCC B limits and European 
CISPR B EN55022 Class B limits. The noise suppressor is supplied by the manufacturer 
and is packed in your terminal’s shipping carton.

The use of shielded I/O cables is required when connecting this equipment to any and all 
optional peripheral or host devices. Failure to do so may cause interference and violate 
FCC and international regulations for electromagnetic interference.