McDATA ULTRANETTM EDGE STORAGE ROUTER 3000 사용자 설명서

8. Select the WWN of the LUN defined on Node 10 (in the 

Peripheral tab) to map to LUN 0x1 on node 20.

9. Repeat step a and step a for each LUN that needs to be statically 

mapped to Node 10.

10. Click on the FibreChannel Advanced tab and select the Show 

 check box.

Selecting the Show Source WWN Filtering check box enables the 
Source WWN

 field to show up on the Host tab.

11. Select the Discover LUN Count from the drop-down menu. This 

value determines the range of LUNs that will be scanned to 
search for attached devices on each discovered target WWN. 
Selectable values range from 2 to 32. All LUNs up to the value 
specified will be scanned. 

For instance, if a value of 2 is selected, LUNs 0 and 1 will be 
scanned for attached devices. If a value of 8 is selected, LUNs 0 
through 7 will be scanned for attached devices.