Magnasonic 15" LCD Television / Monitor MLD1525 사용자 설명서

12

( VCR’s & DVD Recorders ) using

:

 Read the user guide supplied with your AV device and ensure that it has Composite or S-Video

connectors

 Make sure that the power of the LCD-TV and the AV device are off
 Connect a Composite video cable (supplied) to the yellow Composite video connector input on the 

back of the LCD TV. Now insert the other end of the composite cable into the yellow Composite

connector output on the AV device

 Alternatively connect a S-video cable (not supplied, provides better image quality) to the S-Video

connector on the back of the LCD TV. Now insert the other end of the S-Video cable into the

S-Video connector on the AV device

 Connect the RCA audio cables (white and red connectors) from the AV devices’ RCA audio

output connectors to the RCA audio input connectors on the back of the LCD-TV

 Connect an an antenna cable (CATV) to the corresponding interface connector (75 O ANT) on the 

back of the LCD-TV. Connect the other end of the antenna cable to the antenna output connector

on the VCR or DVD recorder. Now you are able to view and record a TV signal at the same time

 Turn on the power of the LCD-TV first, and then turn on the power of the AV device
 Press the Input button to set the video input mode of the LCD-TV to “AUX” if you used a

Composite video cable to make the connection. Press the Input button to set the video input mode 

of the LCD-TV to “S-Video” if you used a S-Video video cable to make the connection. 

:

 Make sure that the power of the LCD-TV is off
 Connect an antenna cable (CATV) to the corresponding interface connector (75 O ANT) on the

back of the LCD-TV. Connect the other end of the antenna cable to the antenna connector on the

wall or on your digital cable / satellite receiver. Now you are able to view regular cable TV

 If you use an aerial (external antenna) to receive TV signals, insert the aerial connector to the

antenna connector (75 O ANT) on the back of the LCD TV. Note that you might require an adapter 

(not supplied) to be able to connect to the antenna connector on the back of this LCD TV. Consult 

your local electronics retailer to determine the type of adaptor you might need 

 Turn on the power of the LCD-TV
 Press the Input button to set the video input mode of the LCD-TV to “ TV mode”. The channel

number appears in the top left side of the screen

 Make sure the antenna is connected to the wall outlet or cable / satellite receiver. Press the Menu 

button twice to enter the Tuning menu and select “ Auto Tuning “

 The LCD-TV will search for all available channels and memorize them
 You can use the PRO / PRO

buttons or the number keys on the remote control to select the 

channel you want to watch