Macally PHR-250CE 사용자 설명서

Introducing IEEE1394A FireWire/Hi-Speed USB2.0
2.5" Hard Drive Data Encrypt Enclosure-PHR-250CE

Thank you for using the PHR-250CE-Portable IEEE1394A FireWire/Hi-
Speed USB2.0 2.5" Hard Drive Enclosure. This is a portable size enclosure
which support 2.5” IDE Hard drive. It is simple to install and comes with all
the parts you need to create an external IEEE1394A FireWire/ Hi-Speed
USB2.0 device.

About This Guide

Before you begin using the PHR-250CE, be sure to read this manual in its
entirety.
This guide contains:
•

Introducing IEEE1394 FireWire/Hi-Speed USB2.0
2.5" Hard Drive Data Encrypt Enclosure

•

Hardware Installation

•

Software Installation

System Requirements

For Mac

• G3, G4, iMac, G3 PowerBook, iBook or G4 PowerBook models

with USB or FireWire port ready

• MacOS 9.2, FireWire support 2.4 and up, and/or USB

support 1.4.1 and up for USB1.1 Speed

• MacOS X for USB2.0 Hi-Speed (USB2.0 Host adapter required)

For PC

• Pentium II or compatible Desktop or Notebook with USB or IEEE

1394 FireWire port ready.

• Windows98 SE, Windows2000, WindowsME or WindowsXP
• USB2.0 host adapter is required for Hi-Speed USB2.0 transfer speed

Using AC/DC Adapter (optional)

Basically, if you connect the PHR-250CC direct into built-in FireWire or
USB port (USB power cable is also needed), AC/DC adapter is not
required. However

(1) if USB connection dose not response or
(2) the PHR-250CC Enclosure is connected to a CardBus to

FireWire adapter, or 4-pin iLink Firewire port

AC/DC adapter is required.