Logik L1CRDAB13E 사용자 설명서

12

GB

1.  Switch on the radio, press and hold MODE/MENU to display the menu.
2.  Press     to select <Backlight>, then press SELECT.
3.  Press     to select <Power on> or <Standby> mode, then press SELECT.
4.  Press     to select Backlight level (<High>/<Medium>/<Low>), then press SELECT.

During standby mode, press any button (except ALARMS) to switch on the backlight 

for 10 seconds. You can also press SNOOZE to adjust the backlight level.

When you move the unit to another part of the country, your pre-tuned and stored DAB stations 
may no longer be available and you might need to reset the unit back to its original factory 
settings. To perform a factory reset, please do the following:
1.  Switch on the radio.
2.  Press and hold MODE/MENU to display the menu.
3.  Press     to select <Factory Reset>, then press SELECT.
4.  Press     to select <Yes>, then press SELECT.

After the factory reset, all the tuned stations, DAB & FM preset stations and alarm 

settings will be erased.

5.  Press STANDBY to switch on the radio. It will automatically scan in DAB mode. When 

scanning is complete, the first alphanumerically found station will be broadcast.

1.  Switch on the radio, press and hold MODE/MENU to display the menu.
2.  Press     to select <SW version>, then press SELECT.
3.  The software version will show on the LCD display.
4.  Press and hold MODE/MENU to exit.

 L1CRDAB13E_IB_130128_Michelle.indb   12

28/1/13   12:20 PM