Maytag Iron MLI7000AAW 사용자 설명서

5

1. Remove the case.

2. Pull the electrical cord out only to the

length required.  Insert the plug all the
way into an electrical outlet.

120 V AC

Red tape

• Do not over extend the cord farther

than the section marked by this red
tape.

It is not necessary to pour water into the
water tank if not using the steam or water
spray features.

1. Press down the steam button to set the

iron to the “Dry” position.

2. Remove the tank and fill it with water, up

to the mark indicating “FULL”.

• Regions that have extremely hard

water should use a mixture of 50% tap
water and 50% distilled water.

• Do not use water treated by household

soft water systems, as it contains
minerals that are harmful to the iron.

• Do not fill the iron with water in excess

of the mark indicating “FULL”. If too
much water has been poured in,
steam will be discharged continuously
whenever the iron is placed on the
cradle.

3. Close the inlet / outlet spout lid, then

reinstall the tank onto the iron.