BMW 2006 330Ci Coupe 사용자 매뉴얼

다운로드
페이지 239
Opening and closing
38
Raising
Press the switch.
>
The closed glass sunroof is raised and the 
sliding visor opens slightly.
>
The open glass sunroof automatically trav-
els into the raised position. The sliding visor 
remains completely open.
Opening, closing
>
Push the switch backwards to the resis-
tance point.
The glass sunroof and the sliding visor open 
together as long as you hold the switch in 
this position.
>
Push the switch backwards past the resis-
tance point. 
The glass sunroof and the sliding visor open 
automatically. Briefly push the switch again 
to stop the opening movement.
You can close the glass sunroof in a similar 
manner by pushing the switch forwards. The 
sliding visor remains open and can be closed by 
hand.
For information on convenient operation via the 
remote control or door lock, refer to page
 
After switching off the ignition
When the remote control is removed or the igni-
tion is switched off, you can still operate the 
sunroof for approx. 1 minute as long as no door 
has been opened.
Pinch protection system
If the glass sunroof encounters an obstruction 
during closing from approximately the middle of 
the opening in the roof, or during closing from 
the raised position, the closing movement is 
interrupted and the glass sunroof is opened 
again slightly.
Despite the pinch protection system 
check and clear the sunroof's travel path 
prior to closing it, otherwise the safety system 
might fail to detect certain kinds of obstruc-
tions, such as very thin objects, and the sunroof 
would continue closing. 
Pushing the switch beyond the resistance point 
and holding it there deactivates the pinch pro-
tection system.
<
Following interruptions in electrical 
power supply
After a power failure, there is a possibility that 
the glass sunroof can only be raised. The sys-
tem must be initialized. BMW recommends 
having this work done by your BMW center.
Closing manually
In the event of an electrical malfunction, you can 
move the glass sunroof manually:
1.
Unclip the front of the cover of the interior 
lamps using the screwdriver from the 
onboard tool kit, refer to page
.
ba8_E9293_US.book  Seite 38  Freitag, 5. Mai 2006  1:02 13
Online Edition for Part no. 01 41 0 012 346 - © 05/06 BMW AG