Danby DAC080EUB2GDB 사용 및 관리

To set the Auto-stop time
1.  Push the TIMER button when the unit is operational; only the Auto-stop feature can 

be set.

2.  Keep pressing the + and - button. Each time pressed will increase the selected time 

by 0.5 hour increments for the fi rst 10 hours and then by 1 hour increments up to 24 
hours.

3.  The time can be set in a range of 0-24 hours.
4.  After the desired time has been selected, wait for about 10 seconds, until the setting 

temperature reappears in the display window of the air conditioner. This indicates that 
the program has been set. 

NOTE:
To cancel the TIMER setting, push the + or -  button until “0 hours” is displayed on the 
LCD window of the air conditioner.

-----------------------------------------------------------------------------------------------------------------------

This function is available in Cool, Dry, and Auto modes (only Auto-Cool and Auto-Fan 
modes). The fan will continue to run for 3 minutes after the compressor has shut off. The 
fan then cycles on for 2 minutes at 10 minute intervals, until the room temperature is 
above the set temperature. At this point, the compressor turns back on and cooling starts.
-----------------------------------------------------------------------------------------------------------------------

1

1