Viking VMOC206BK 설치 설명서

E5

Surface Installation

Flush Mount Installation

8

DUCT RECESS

BOTTOM 

DUCT 

ASSEMBLy

FOOT

CABINET INSTALLATION: Avoid pinching the cord between the oven 

and the wall. Adjust the position of the oven so that the feet of the oven 

are fitted into the holes of the Bottom Duct Assembly. See figure 8.

9

SCREw (B)

SCREw (B)

SCREw (B)

SCREw (B)

FRAME INSTALLATION: Position the BACk FRAME to align with the 

predrilled holes that were drilled with the mounting template. Check 

that it is level and then secure with four SCREwS (B). See figure 9. 

Secure the bottom portion of the BACk FRAME with the two remaining 

SCREwS (B).

!

SNAP 

ATTACHMENT

DECORATION INSTALLATION: Place the FRONT decoration onto the 

FRAME and align ball studs and receivers. Secure the DECORATION 

to the FRAME by firmly pushing the front frame onto the back frame 

engaging the four (4) snap attachments. See figure !.

PARTS INCLUDED IN FLUSH MOUNT ACCESSORy kIT 
(PURCHASED SEPARATELy):

• (2) Stainless Steel Scoops
• (10) Stainless Machine Screws
• (1) Flush Mount Template
• (2) Side Trim

* See FLUSH MOUNT TEMPLATE for additional installation instructions.

"

FLuSh MOuNT INSTALLATION: Place the 2 Scoops on the back of 

the frame as shown and align the screw holes on the scoop with the 

tapped holes in the frame. Secure the scoops to the frame using 6 

of the machine screws provided in the kit. Place the side trim pieces 

on the back of the frame as shown and align the top and bottom 

most screw holes with the corresponding taped holes in the frame. 

Secure the trim pieces with the 4 remaining machine screws provided. 

Attach the frame assembly to the wooden side spacers by aligning 

the mounting holes in the frame with the pre-drilled holes in the side 

spacers and secure with SCREw (B) provided with the trim kit. See 

figure ".

DECORATION INSTALLATION: Place the FRONT decoration onto the 

FRAME and align ball studs and receivers. Secure the DECORATION 

to the FRAME by firmly pushing the front frame onto the back frame 

engaging the four (4) snap attachments. See figure !.