Zephyr ZSIE30AS 사용자 매뉴얼

Clean the hood surface periodically with hot soapy water and clean cotton cloth. Do not use corrosive or 
abrasive detergent, or steel wool/scouring pads which will scratch and damage surface.

For heavier soil use liquid degreaser.

After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners, to polish and 
buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.

Do not use any product containing chlorine bleach. Do not use “orange” cleaners.

The baffl e fi lters installed by the factory are intended to fi lter out residue and grease from cooking.  They 
need not be replaced on a regular basis but are required to be kept clean.

Remove and clean by hand or in dishwasher on low heat.  Spray degreasing detergent and leave to soak if 
heavily soiled.

Dry fi lters and re-install before using hood.

1. Push in on spring loaded handle

2. Pull down on fi lter hande to remove fi lter

Should fi lters wear out due to age and prolonged use,                                                                                 
replace with following part number:

ZSI 

 

50200050 

       2