Zephyr ZAZM90BS 사용자 매뉴얼

www.zephyronline.com

Clean the hood surface periodically with hot soapy water and clean cotton cloth. Do not use corrosive or 
abrasive detergent, or steel wool/scouring pads which will scratch and damage surface.

For heavier soil use liquid degreaser.

After cleaning it is recommended that you use non-abrasive stainless steel polish/cleaners, to polish and buff 
out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain.

Do not use any product containing chlorine bleach. Do not use “orange” cleaners.

The aluminum mesh fi lters installed by the factory are intended to fi lter out residue and grease from cooking. 
They need not be replaced on a regular basis but are required to be kept clean.

Remove and clean by hand or in dishwasher on low heat.  Spray degreasing detergent and leave to soak if 
heavily soiled.

Dry fi lters and re-install before using hood.

1. Push down on fi lter latch

2. Pull front of fi lter down to remove

Should fi 

lters 

wear 

out 

due 

to 

age 

and 

        

prolonged 

use, 

replace 

with 

the 

following 

        

part number:

ZAZ-M90BS 50200038 

2

ZAZ-E42BS 50200038  3