Zephyr ZRVM90AGC 사용자 매뉴얼

www.zephyronline.com

3  LIGHTS BUTTON
     - Lights are two levels, High and Low.
     - From off, press one time for High. Press again for Low. Press again to power lights off.

4  DISPLAY INDICATORS
     Mesh Filter Clean Reminder (always enabled)
     - After 30 hours of fan usage, the       button indicator will begin to slowly blink indicating it is time to  
       clean the mesh filters. 
     - To reset: With hood off: hold the      button for three seconds. All LED indicators will blink two times       
       confirming the 30 hour timer has been reset.  
     

Charcoal Filter Replace Indicator (disabled by default, must be enabled if recirculating hood)

     - To enable Charcoal Filter Replacement Reminder:
 

- With hood off, hold       button and       button simultaneously for two seconds. All LED indicators  

               will illuminate for three seconds confirming the Charcoal Filter Replace Reminder is enabled.
     - To disable Charcoal Filter Replacement Reminder:
 

- With hood off, hold       button and       button simultaneously for two seconds. All LED indicators  

 

  will blink two times confirming the Charcoal Filter Replace Reminder is disabled.

     - After 120 hours of fan usage the       button will slowly blink indicating the charcoal filters need   
       replacment. 
     - To reset: With hood off, hold the       button for two seconds. All LED indicators will blink two times  
       confirming the 120 hour timer has been reset.