Maytag MEDC415EW 매뉴얼

Push and hold the PUSH TO START knob to begin the cycle.

Select temperature by turning the knob to the desired position or 

select the Automatic Dry Cycle that has the temperature included 

in the cycle selections. See “Setting the Drying Temperature”.
NOTE: Not all options and settings are available with all cycles.

Select the desired cycle for your load. See the Cycle Guide  

for more information about each cycle. 
SENSOR DRY/AUTOMATIC DRY Cycles
You can select a different dryness level, depending on your load,  

by turning the knob to dryness level. 
Selecting More Dry, Energy Preferred, or Less Dry automatically 

adjusts the dryness level of the fabrics at which the dryer will 

shut off. 
Sensor Dry/Automatic Dry cycles give the best drying in the 

shortest time. Drying time varies based on fabric type, load size, 

and dryness setting. Choose Energy Preferred for optimal  

energy savings. Less Dry removes less moisture and is used for 

loads you may want to put on a hanger to complete drying.
More Dry removes more load moisture. Energy Preferred is used 

for a starting point for Sensor Dry/Automatic Dry cycles. 

Turn the END OF CYCLE SIGNAL knob to select the desired 

setting (On or Off). The End of Cycle Signal produces an  

audible sound when the drying cycle is finished. Promptly 

removing clothes at the end of the cycle reduces wrinkling.

To purchase a drying rack for your dryer, please refer to  

“Assistance or Service” on the back cover of the manual or 

contact the dealer from whom you purchased your dryer.

3406839

Drying rack - fits 29" Super Capacity Plus

Select Wrinkle Control by turning the knob to the desired 

position.
Get up to 90 minutes of heat-free, periodic tumbling at the 

end of a cycle. Turn the WRINKLE CONTROL knob to OFF 

or 90 min. at any time before the cycle has ended.
NOTE: Not all options and settings are available with all 

cycles.