Rohl R7520SS 사양 시트
www.rohlhome.com
INSTALLATION INSTRUCTIONS
Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
Care and Maintenance: After use, wipe down with a soft, dry cloth.
For all chrome plated surfaces clean this product with warm soapy water and then dry with a
dry soft cloth.
Nickel plated, satin and Inca brass finishes should be cleaned with a soft cloth and warm
water. Then dry with a dry soft cloth.
Do not use cream cleaners or cleaning agents containing a corrosive acid or scouring agent
including: Softscrub, Comet, Ajax and Bonami, as these may damage the surface of the faucet.
Do not use any spray cleaners with ammonia or alcohol like Windex, 409 or Fantastik.
Any use of unsuitable cleaning agents causing damage to the surface will not be covered by
the warranty.
WARRANTY: Warranty is limited lifetime. See ROHL website for details. (www.rohlhome.com).
dry soft cloth.
Nickel plated, satin and Inca brass finishes should be cleaned with a soft cloth and warm
water. Then dry with a dry soft cloth.
Do not use cream cleaners or cleaning agents containing a corrosive acid or scouring agent
including: Softscrub, Comet, Ajax and Bonami, as these may damage the surface of the faucet.
Do not use any spray cleaners with ammonia or alcohol like Windex, 409 or Fantastik.
Any use of unsuitable cleaning agents causing damage to the surface will not be covered by
the warranty.
WARRANTY: Warranty is limited lifetime. See ROHL website for details. (www.rohlhome.com).
A basic in-line filter system is required for the house to protect any debris from entering the
water supply line to the house (i.e. due to construction or service work on the street
water main).
water supply line to the house (i.e. due to construction or service work on the street
water main).
ROHL LLC 3 Parker Irvine, CA 92688
714-557-1933 www.rohlhome.com
ROHL MODERN ARCHITECTURAL SIDE LEVER
STAINLESS STEEL PULL-DOWN KITCHEN FAUCET
INSTALLATION INSTRUCTIONS
R7520SS
Please leave this form with the product once installed.
SYSTEM REQUIREMENTS
To ensure the optimum performance and customer satisfaction please adhere to the following:
Flush out all pipe work prior to installation.
Minimum operating pressure
40psi
Maximum operating pressure
70psi
Recommended operating pressure
60psi
*Note: Pressures over 70psi may require that the house have a pressure regulator
installed to limit the pressure below 70psi.
Maximum hot water temperature
120ºF
If the water temperature exceeds 120ºF an approved tempering valve must be fitted.
Maximum flow rate limited to 1.8 US gallons/minute at 60psi flow pressure .
Failure to comply with the above will void all warranties.
#41942 03/15