Marvel ML24WD 사용자 설명서

다운로드
페이지 24
11
NOTE
Single Zone Models:
To set or check the set-point temperature (with the control 
out of sleep mode), press the "-" or "+" keypads. "SET" will 
be indicated on the user interface panel and the current 
set-point temperature will display and flash. Subsequent 
presses of the "-" or "+" keypads will adjust the temperature 
colder or warmer respectively. When you have reached 
your desired set-point temperature, press the "On/Off" key-
pad to accept, or do nothing and the "Set" mode will time-
out in 10-seconds accepting the displayed temperature as 
the new set-point.
The available set-point temperature range for your appli-
ance is 40°F (4.5°C) to 65°F (18.4°C). If you attempt to 
adjust the temperature outside of this range you will receive 
an audible notification.
Dual Zone Models:
Temperatures can be set for each individual zone (upper 
and lower) in the dual zone wine cellar. To do so you must 
first select the zone you want to set the temperature for.
You do so by pressing the upper or lower button on the 
display. When pressed the LED light will be illuminated for 
the respective display.
To change the set temperature for a particular zone, with 
the zone selected and out of sleep mode, press the "-" or 
"+" keypads. "SET" will be indicated on the user interface 
panel and the current set-point temperature will display 
and flash. Subsequent presses of the "-" or "+" keypads 
will adjust the temperature colder or warmer respectively. 
When you have reached your desired set-point tempera-
ture, press the "On/Off" keypad to accept, or do nothing 
and the "Set" mode will time-out in 10-seconds accepting 
the displayed temperature as the new set-point. 
The available set-point temperature range for your appli-
ance is 45°F (7.3°C) to 55°F (12.9°C) for the lower zone 
and 55°F (12.9°C) to 62°F (16.8°C) for the upper zone. 
If you attempt to adjust the temperature outside of these 
ranges you will receive an audible notification.
Lower zone
selected
Upper zone
selected
Interior display lighting (Single and Dual 
Zone): 
(Glass door models only)
Your appliance is equipped with a dual light level display 
lighting feature. With the control out of sleep mode press 
the "Light" keypad once to activate the interior lighting 
display feature at full illumination. A confirmation tone will 
sound, and the light bulb "Icon" will illuminate. Pressing 
the "Light" keypad a 2nd time will dim the lighting to 50%. 
A 3rd press will deactivate the display lighting feature. The 
display lighting will automatically deactivate after 4-hours.
Adjusting the temperature: 
When initially loading your product with warm contents, it 
may take up to 48-hours for the storage compartment tem-
perature to stabilize.
When making temperature set-point changes, it may take 
up to 24-hours for the stored contents to stabilize at your 
new set-point temperature.
Factors that affect the storage compartment stabilized 
temperature:
•  Changes to temperature setting.
•  Room temperature changes.
•  Temperature of stored contents.
          - Loading warm contents.
          - Cold content load will delay the change to a warmer
            set-point temperature.
          - Warm content load will delay the change to a colder
            set-point temperature. 
•  Usage, (number and duration of the door openings).
•  Use of the storage compartment display lighting, (glass 
door product only).
•  Installation of the appliance in direct sunlight or next to 
a heat source.
USING YOUR ELECTRONIC CONTROL