Marvel ML24WDG2RS 사용자 설명서

11

To set or check the set-point temperature (with the control 

out of sleep mode), press the "-" or "+" keypads. "SET" will 

be indicated on the user interface panel and the current 

set-point temperature will display and flash. Subsequent 

presses of the "-" or "+" keypads will adjust the temperature 

colder or warmer respectively. When you have reached 

your desired set-point temperature, press the "On/Off" key-

pad to accept, or do nothing and the "Set" mode will time-

out in 10-seconds accepting the displayed temperature as 

the new set-point.

The available set-point temperature range for your appli-

ance is 40°F (4.5°C) to 65°F (18.4°C). If you attempt to 

adjust the temperature outside of this range you will receive 

an audible notification.

Temperatures can be set for each individual zone (upper 

and lower) in the dual zone wine cellar. To do so you must 

first select the zone you want to set the temperature for.

You do so by pressing the upper or lower button on the 

display. When pressed the LED light will be illuminated for 

the respective display.

To change the set temperature for a particular zone, with 

the zone selected and out of sleep mode, press the "-" or 

"+" keypads. "SET" will be indicated on the user interface 

panel and the current set-point temperature will display 

and flash. Subsequent presses of the "-" or "+" keypads 

will adjust the temperature colder or warmer respectively. 

When you have reached your desired set-point tempera-

ture, press the "On/Off" keypad to accept, or do nothing 

and the "Set" mode will time-out in 10-seconds accepting 

the displayed temperature as the new set-point. 

The available set-point temperature range for your appli-

ance is 45°F (7.3°C) to 55°F (12.9°C) for the lower zone 

and 55°F (12.9°C) to 62°F (16.8°C) for the upper zone. 

If you attempt to adjust the temperature outside of these 

ranges you will receive an audible notification.

Lower zone

selected

Upper zone

selected

(Glass door models only)

Your appliance is equipped with a dual light level display 

lighting feature. With the control out of sleep mode press 

the "Light" keypad once to activate the interior lighting 

display feature at full illumination. A confirmation tone will 

sound, and the light bulb "Icon" will illuminate. Pressing 

the "Light" keypad a 2nd time will dim the lighting to 50%. 

A 3rd press will deactivate the display lighting feature. The 

display lighting will automatically deactivate after 4-hours.

When initially loading your product with warm contents, it 

may take up to 48-hours for the storage compartment tem-

perature to stabilize.

When making temperature set-point changes, it may take 

up to 24-hours for the stored contents to stabilize at your 

new set-point temperature.

Factors that affect the storage compartment stabilized 

temperature:

•  Changes to temperature setting.

•  Room temperature changes.

•  Temperature of stored contents.

          - Loading warm contents.

          - Cold content load will delay the change to a warmer

            set-point temperature.

          - Warm content load will delay the change to a colder

            set-point temperature. 

•  Usage, (number and duration of the door openings).

•  Use of the storage compartment display lighting, (glass 

door product only).

•  Installation of the appliance in direct sunlight or next to 

a heat source.