Zephyr COKE36BSX 매뉴얼
10
www.zephyronline.com
INTERNAL BLOWER PREPARATION
1. Position internal blower inside hood body so
internal blower collar proturdes though 6” round
fl ange opening.
fl ange opening.
2. Secure internal blower to internal blower fl ange
by (4) M4*16 screws from internal blower
hardware.
hardware.
3. Position capacitor box inside hood body and
secure by (2) M4*8 screws from internal blower
hardware.
hardware.
4. Secure ground wire from capacitor box to
ground wire rivet nut next to capacitor box.
5. Connect 9 pin molex connector from internal
motor to 9 pin molex connector from capacitor
box cable. Secure cable to hood interior with zip
tie and zip tie holder.
box cable. Secure cable to hood interior with zip
tie and zip tie holder.
6. Connect 6 pin molex connector from control
board box to 6 pin molex connector from
capacitor box cable. Secure cable to hood
interior with zip tie and zip tie holder.
capacitor box cable. Secure cable to hood
interior with zip tie and zip tie holder.
Installation –
Internal Blower