Zephyr CTPE60BSX 사용자 매뉴얼

F

The standard baffle filters are required to be cleaned frequently and as recommended in order to maintain blower 
efficiency.  If improperly maintained, residue from cooking will sift through filters and cause damage to hood blowers and 
other sensitive components; and possibly clog duct work and create a fire hazard.

Blower On/Off

Adjust 3 Speed Levels

15 Min Delay Off

Lights On/Dim/Off

Display

(Speed level, Delay Off Indicator)

1

2

3

4

5

By pressing      , the blower is switched On and Off. When switched on, the blower and lights turn on at the same
setting they were switched off at. When switched off the entire hood powers off, including the LED and Mood lights.

The 3 speed levels are selected by pressing       to decrease and       to increase speed level. The
display indicates speed level selected. Pressing       when the hood is off will also turn it on. 

This is used for programmed shut down of blower and lights 15 minutes after the function is
activated. Press       once, a dot displays in the lower right hand side of display          indicating
the function is on. The hood will change to speed 1 and shut down after 5 minutes.  

Switch lights On by pressing       once, again to dim and again to switch Off.

Baffle Filter Clean Reminder
After every 30 hours of use the display will start flashing an          reminding you to clean the baffle filters 
from residue and possible clogs.

1

2

3

4

Displays blower speed level, delay off status and filter clean/replace notification.

5

Clean Air Feature
Clean Air is a feature that turns the blower on every 4 hours for 10 minutes to remove stagnant air in 
the kitchen. This feature is disabled by default and must be enabled by the user.