Gaggenau VG491210CA 설치 설명서
10
Flush mounting:
Flush mounting into a countertop is
possible.
Flush installation:
The appliance can be installed in
the following temperature- and water-resistant
countertops:
countertops:
▯
Stone countertops
▯
Plastic countertops (such as Corian®)
▯
Solid wood countertops: Only in consultation with
the manufacturer of the countertop (seal cut-out
edges)
the manufacturer of the countertop (seal cut-out
edges)
▯
Installation in other countertops only in
consultation with the manufacturer of the
countertop.
consultation with the manufacturer of the
countertop.
Installation in countertops made of particleboard is
not possible.
not possible.
Note: Any cut-out work on the countertop must be
performed in a workshop according to the installation
diagram. The cut-out must be made cleanly and
precisely since the cut-out edge is visible on the
surface. Clean and degrease the cut-out edges with a
suitable cleaning agent (bear in mind silicone
manufacturer's processing instructions).
performed in a workshop according to the installation
diagram. The cut-out must be made cleanly and
precisely since the cut-out edge is visible on the
surface. Clean and degrease the cut-out edges with a
suitable cleaning agent (bear in mind silicone
manufacturer's processing instructions).
Combining several Vario devices:
For combining
several Vario appliances, the connecting strip VA 420
000/001/010/011 is available separately as an
optional accessory. When creating the cut-out, bear in
mind the additional space required between the
appliances for the connecting strip (see installation
instructions VA 420 000/001/010/011).
000/001/010/011 is available separately as an
optional accessory. When creating the cut-out, bear in
mind the additional space required between the
appliances for the connecting strip (see installation
instructions VA 420 000/001/010/011).
Appliances can also be installed in individual cut-outs,
bearing in mind a minimum distance between the
devices of 2" (51 mm).
bearing in mind a minimum distance between the
devices of 2" (51 mm).
When combining several appliances with or without
appliance cover, you can use the appliance extensions
VA 450 110/-400/-600/-800/-900 (depending on
appliance width) to balance out dimension
differences.
appliance cover, you can use the appliance extensions
VA 450 110/-400/-600/-800/-900 (depending on
appliance width) to balance out dimension
differences.
PLQ
PLQ
PLQ
PP
PLQ
U
9$
9$