Dacor DR30EIFS 매뉴얼

10

Operating the Oven

2.  Begin to slide the rack in, lifting the front safety clips 

over the front of the oven rack supports.

3.  Push the rack all the way in.
4.  Grasp the rack in the center of the front and pull. The 

rack should come forward while the guides remain in 

place.

•  Grasp the rack with both hands and pull it gently 

straight out toward you until it stops.

•  Lift up until the front safety clips just clear the front 

of the rack supports on the oven. Continue to pull out. 

Moving the end of the rack back and forth slightly, left 

to right, as you pull, will make it easier to remove.

Installing the Oven Racks

To reduce the chance of burns, position the oven racks 

when the oven is cool. If you must reposition a rack 

when the oven is hot, do not allow pot holders to 

contact the heating element inside the oven.

Your oven comes with Dacor’s deluxe GlideRack oven 

racks. You can pull them out further than other types of 

oven racks and still support heavy pots and pans full of 

food. They are great for heavier foods and the optional 

Dacor baking stone.

1.  Align both sets of safety clips (right and left) on the 

back of the rack guides with the oven rack supports as 

shown below. NOTE: The diagram below shows instal-

lation with the rack guides extended but, the rack 

may be installed with or without the guides extended, 

whichever is easier.

Front of 

rack

Lift front safety clips 

over rack supports

Rack 

support

Slide oven rack 

supports between 

back safety clips

Back of 

guide

Rack guides