Asko D5536XXLFI 설치 설명서

TYPE A

The door springs are on the sides of the dishwasher.

If necessary, pull out the dishwasher and adjust the

tension of the door springs. A good idea is to try

adjusting one side only first.

1. Be sure the door is closed.

2. Grab the front end of the spring and pull it up and

forward to release it from the forward mount.

3. Loosen the spring from the rear mount by turning

it outwards.

4. Adjust the spring tension using one of the following

methods depending on how much adjustment is

needed.

If you need to adjust the spring a lot, place the

rear mount in another hole. Place the spring further

forward to reduce the tension and further back to

increase the tension.

If you want to make small adjustments to the

spring, hold the back end with one hand and turn

the forward mount clockwise or counterclockwise

one or more times. Turn the mount clockwise to

increase spring tension and counterclockwise to

reduce spring tension.

Reduce spring tension

Incr

ease spring tension

Increase spring tension

Reduce spring tension

STEP 3. ADJUSTING THE DOOR SPRINGS

TYPE A

TYPE B (SEE PAGE 12)

Check that the door is balanced. It should not fall open

or snap shut. Adjust as necessary.

XL = 3-11 kg

XXL = 1-9 kg

CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM

492181 Install DW16 FI USA EN Rev 01.indd 11

2015-01-13 11:14:00