Asko D5536XXLFI 설치 설명서
4
5
D5526XXLFI, D5536XXLFI, D5536XXLFISOF, D5556XXLFI
XXL DISHWASHERS
UNIT DIMENSIONS
U.S.
Metric
Height (Adjustable)
33-7/8˝ to 35-7/8˝
860 mm to 912 mm
Width
23-5/8˝
600 mm
Depth (Includes high loop)
22-7/8˝
581 mm
Depth W/Door Open
49-1/2˝
1257 mm
Weight
110 Ib
50 kg
Technical Data
Electricity
120V, 60Hz, 15 amp
Water pressure
4.2 - 140 psi,
0.03-1.0 MPa,
0.3-10 Bar
0.03-1.0 MPa,
0.3-10 Bar
Heating element
1200 watt
Max loading
1300 watt
33-7/8" to 35-7/8"
860 mm to 912 mm
2-7/8"
73 mm
73 mm
3-3/8"
86 mm
86 mm
49-1/2"
1257 mm
1257 mm
5-3/8" to 7-3/8"
137 mm to 187 mm
23-5/8"
600 mm
22-7/8"
581 mm
9"
229 mm
3-1/8"
79 mm
79 mm
Door
The best place for your dishwasher is in the kitchen near
the sink. This makes it easier to connect the water and
drain supply lines.
A built-in dishwasher must be enclosed on the top, both
A built-in dishwasher must be enclosed on the top, both
sides and the back.
The power-supply receptacle for the appliance shall
The power-supply receptacle for the appliance shall
be installed in a cabinet or on a wall adjacent to the
undercounter space in whitch the appliance is to be
installed.
The electrical and water supplies should enter through
The electrical and water supplies should enter through
the area indicated by the shading on the illustration at
right. Preferably, they should come through the right side
of the machine. The access hole must be round and
smooth and no bigger than 1-1/2˝ (38 mm) in diameter. If
the partition is metal, it needs to be covered with an edge
protector. Use caution when the appliance is installed
or removed, to reduce the likelihood of damage to the
power-supply cord.
Cutout Dimensions
U.S.
Metric
Height** 33-7/8˝ – 36˝
860 – 914 mm
Width
23-5/8 – 24˝
600 – 610 mm
Depth
24˝
610 mm
** If accessory FI fill strips are used, then 1/2˝ (13 mm) must
be added to the dishwasher height and cutout. Additionally,
3/8˝ (10 mm) must be added to the dishwasher width and
cutout width.
23-5/8" – 24"
600 – 610 mm
24"
610 mm
4"
102 mm
5-3/8"
136 mm
**33-7/8"
–
36" minimum
**860
–
914 mm
2"
51 mm
PREPARING THE LOCATION
CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM
CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM
492181 Install DW16 FI USA EN Rev 01.indd 4
2015-01-13 11:13:50