Smeg FAB32UPB 사용자 매뉴얼

Installation

28

•  To allow proper cooling of the 

condenser, the refrigerator must not be 
placed too close to the wall. To prevent 
this, the appliance comes complete with 
two plastic spacers which must be fitted 
to the top of the condenser.

Positioning

Place the appliance on a stable and level 
floor. If the floor is not perfectly level, use 
the two adjustable feet on the front part of 
the appliance.

The appliance has two small wheels on the 
back to allow it to be moved and 
positioned more easily.

In any case, we recommend moving the 
appliance very carefully in order to avoid 
damaging the floor (especially in the case 
of wooden floors).

5.3 Electrical connection

General information

•  Check the grid characteristics against the 

data indicated on the plate. The 
identification plate bearing the technical 
data, serial number and brand name is 
visibly positioned inside the appliance. 
Do not remove this plate for any reason.

•  Make sure that the plug and socket are 

of the same type.

•  Avoid using adapters and shunts as 

these could cause overheating and a risk 
of burns.

•  The plug must always be accessible 

when the appliance is installed.

•  Leave the refrigerator standing vertically 

for at least two hours before turning it on 
for the first time.

•  If it is necessary to replace the power 

cable, this must be performed by an 
authorised technician from Technical 
Support Service.

Power voltage
Danger of electrocution

•  The appliance must be connected to 

earth in compliance with electrical 
system safety standards.

•  Do not pull the cable to remove the 

plug.