Zephyr CCAE30ASX 매뉴얼
15
1. Select preferred duct location (internal blower -
vertical or horizontal, external blower - vertical
only).
only).
%HJLQLQVWDOODWLRQE\UHPRYLQJWKHEDIÀH¿OWHUV
5HLQIRUFHFDELQHWZLWK´[´ZRRGVWULSVLI
additional strengthening is required. Must be
placed inside frameless cabinets.
placed inside frameless cabinets.
4. Temporarily position the range hood in the
desired mounting location. Measure and
mark the mounting holes, duct and electrical
locations with a pencil.
NOTE:
mark the mounting holes, duct and electrical
locations with a pencil.
NOTE:
,IXVLQJDQLQWHUQDOEORZHUD´URXQG
duct opening is necessary. If using an external
EORZHUDQ´URXQGRSHQLQJLVQHFHVVDU\
EORZHUDQ´URXQGRSHQLQJLVQHFHVVDU\
5. Drill/cut out the required openings for duct and
electrical access; make sure the duct opening
is large enough to apply duct tape.
NOTE: If installing an external blower, cut out a
PLQLPXP´RSHQLQJIRUWKHH[WHUQDOEORZHU
wires to pass through. Refer to page 8 for
VSHFL¿FDWLRQV
is large enough to apply duct tape.
NOTE: If installing an external blower, cut out a
PLQLPXP´RSHQLQJIRUWKHH[WHUQDOEORZHU
wires to pass through. Refer to page 8 for
VSHFL¿FDWLRQV
6. Fasten hood onto cabinet with screws provided.
7. Install electrical.
8. Install duct work and duct tape.
5HLQVWDOOEDIÀH¿OWHUV
10. Power up hood and check for leaks around duct
tape.
duct/silver
tape
tape
5. Duct
opening
cutout
cutout
3. Add 1x2
wood strips
2. Baffle
filters
Installation –
Mounting the Range Hood