Marvel M24TFWSR 설치 설명서

18

Support 

door before 

removing 

hinge-

1.  Loosen the set screw in the bullit cap with a 

3

⁄

32

" hex 

key and remove the bullit cap from the hinge pin by 

sliding off. There are 4 bullit caps to remove altogether, 

1 at the top hinge, 2 at the center hinge, and 1 at the 

bottom hinge. Remove all 4 and set aside parts for later 

reassembly.

2.  Loosen 

5

⁄

16

" Hex Nut underneath the top hinge with a 

1

⁄

2

" 

open end wrench, unscrew completely from the hinge 

pin. See Figure 24.

3.  Make sure the door is supported, and remove the hinge 

pin from the cabinet hinge with a flat bladed screw-

driver.

4.  Carefully lift the door off the center hinge.

Figure 23

Bullit cap-

-Set screw

-

5

⁄

16

 Hex 

nut

Top hinge 

pin-

Door

hinge-

-Cabinet

hinge

Figure 24

Figure 25

#10 screws 

in side of 

cabinet-

-Center

hinge

-Bullit cap

Set screw-

-Door

hinge

-Cabinet

hinge

Figure 26

Use two or more people to move product.

Failure to do so can result in back or other injury.